Other Products

ABCON MARINE has a strong history and profound knowledge when it comes to

stopping leakages with our ABCON MARINE SL products and reducing wear and

tear on vessels through our ABCON MARINE+ products.

​Teflon is known as the material that provides the lowest friction. It is a widely-used material in numerous industries and helps reducing wear and maintaining equipment. In ABCON, we specialise in developing additives which are extremely efficient with reducing wear and tear and stopping leakages.

​All products have been developed in close corporation with Danish shipping lines and have been carefully tested on board their ships before they were introduced to the market in 2006.

ABCON MARINE GEAR+

Our GEAR+ product is a gear oil additive for treatment of gearboxes and transmission systems. GEAR+ offers the best lubrication and anti-wear protection of the gear and bearing surfaces of all type of gears (helical, spur and worm drive).

​The smaller teflon particles in GEAR+, when subjected to pressure and temperature, impregnate the friction surfaces, thus, reduce friction even at start up after lay-up periods. The larger teflon particles, circulating the gear lubricant, will create a cushion between gear surfaces and will, thereby, decrease the gear pitting. This cushion effect also reduces the noise caused by minor irregularities of mating surfaces.

GEAR+ has the benefits of reducing friction and operation temperature improving extreme pressure protection. It extents the life of the components and reduces the risk of oil leakages and provides you with a quieter operation.

ABCON MARINE GEAR SL

Oil spill from gear boxes can be eliminated or reduced by adding a small quantity of our GEAR SL to the existing lube oil. Lube oil often leaks from small openings in the gear box, for instance, where the shafts exits or along the lines where the box is assembled. Due to the content of special shaped particles in GEAR SL, the leaking gap will soon be stopped and a barrier established. 

ABCON MARINE GEAR SLL

GEAR SLL (Stop Leak Large particles) is for larger oil spill from gear boxes. Those leaks can be reduced or eliminated by adding a small quantity of our GEAR SLL to the existing lube oil.  Due to the content of larger special shaped particles in GEAR SL, the leaking gap will soon be stopped and a barrier established.

Bio Based Versions

Our products are also available in Bio degradable oil based versions with both saturated and unsaterated ester. They all comply with the 2013 EPA VGP requirements as environmentally acceptable. For more infomation about our Bio products click here.

ABCON MARINE-SEAL PROTECT+

Extend and increase the protection of rubber seals on moving parts by using our SEAL PROTECT+ when assembling. Even during longer stand still, the full lubricity capability is maintained reducing the risk of damaging the seals when starting up again. SEAL PROTECT+ is a complex teflon based lubrication paste, which provides long-term lubrication of components that are otherwise difficult or impossible to lubricate after initial assembly.

ABCON MARINE-MLP

Our ABCON MARINE MLP is a Multi-Lubrication Paste which can be applied all places where you need extremely high film strength, adhesion and protection during assembling. MLP does not harden with age, and protect exposed components against rust and other corrosion. Even aluminum in contact with stainless steel will be protected. MLP also protects well against salt water.

​MLP functions in up to 250 degrees Celsius. It makes disassembly of the machinery easier and offers a high degree of residual lubrication.

  • Valve spindle and seals
  • All bearings and surfaces
  • Hinge pins and hatch bolts
  • Exhaust system and hot bolts
  • Engine assembly
  • Threads (particularly those to be torqued)
  • Treads, bolts etc. which are exposed to seawater

​Our products are easy to use and can be applied by the staff on board the vessel. 

Still Have Questions?

If you have any questions about your case, please, do not hesitate to contact us. We provide individual consultance based on your specific situation. If you want more detailed product information or need a professional perspective on your case, please, contact us by e-mail: info@abcon.eu

Select product

Stern Tube Leakage

Thruster Leakage

B Series EAL
Products

Stern Tube Water Ingress

Thruster Water Ingress

Hydraulics

Stern Tube Preventive
Care

Thruster Preventive
Care

Other Products

Contact us